7" Touch Panel Control

 Compact Size 2010mm

Cabinet ( Optional )

 Wifi  WLan function (Optional)

Heater Module  

 7" Touch LCD Panel. Easy operating.

 USB Interface for PC (Optional Package)

SIMEMA

USB

WLAN

WiFi

Chamber temperature is on screen.

 Various Data Profile name Edit

570-77A (Optional )Profiler : 0.5 sec recognization.

Real time & Memory both using.

Other Reflows

Model	Heating zone	Chamber Length	Conveyor Width	Dimension (L.W.H)
551-15	4 or 5 zone	850mm / 1,020mm	405mm	2010 x 790 x 550
551-20	8 or 10 zone	2200mm	405mm	3400 x 790 x 1268

The soldering system 551.15 is a new development made by SEF and combines the competence of more than 30 years in the manufacturing of reflow ovens with modern requirements regarding usability, low power consumption and interfaces for the communication with other devices.

The basic system is designed as a desk top model and is equipped with eight heating zones, 5 upper and 5 bottom zones.The heating zones emit convection heat with the help of hot air fans. The upper part of the heating chamber contains additionally a cooling zone and an exhaust hood at the inlet area as well as at the outlet area.

The transport of the PCBs follows via a mesh belt. The operation of the soldering system is done with the help of a modern 7” touch panel. A 1-channel temperature profiler is integrated to check the soldering profile. The necessary thermocouple is included in the delivery.

Here the cooling zone will be replaced by an additional heating zone so that the oven has 5 upper and 5 bottom heating zones. The cooling takes place by fans which will be mounted at the machine hood above the outlet area.

The soldering system 551.19 offers higher production capacities but same technical functions. The modular system has a basic design with 20 zones (10 upper, 10 bottom), which can be used as heating zones or cooling zones individually, for example 8 heating zones and two cooling zones.

l       Upto 80% Energy Power Saving

Functions are same but heating chanmber length and number of zone are different.

551 Series Reflows have induvidual chamber method. Therefore, easy and fast maninternance service is available.

Technical Spec 551 Series                     Max Setting temp. 350'c

FUNCTION			551-15	551-20
1	Full Air convection		O	O
2	Heating Zone (upper 4/5, Down 4/5)		4/5	8/10
3	Heating Length		1060mm	2,200mm
4	Mesh Conveyor Width		405mm	405mm
5	Inlet Height Conveyor 45mm		O	O
6	Built in Temperature Profiler		O	O
7	Parameter Memory		O	O
8	Conveyor Speed 15cm ~ 90cm/Min		O	O
9	7” Touch Panel Control		O	O
10	Base Cabinet		opt	O
11	Communication Package	SEMEMA USB Port for PC WLAN . WiFi	SEMEMA    (Option)	O
		1. 2. U
		2. 3.
12	Power Save Package -Single board recognition - Power down Mode   : The system changes to standby mode with reduced heating power. When recognizing a board at the inlet , the conveyor stops, the oven is heating up to soldering temperature and then starts the conveyor again.		O	O
13	Tower Signal Lamp unit		Opt	Opt
14	Combination Conveyor (Mesh or Finger)		Opt	Opt
15	Exhaust Fan Motor Box		Option	Option
15	Dimension ( L.W.H )mm		2010x790x550	3400x790x1268
16	Power		3 x 380V.(N)220V.PE or 3 x 220v
17	Heater Power		Max 12KW	Max 21KW
18	Weight		190.Kg	560.Kg
l We have a right to change specification without notice.

Individual heating chamber type

: easy and fast maintenance.

Easy program. Various parameter value can be stored.

Built in 1ch temperature profiler.

Various application without PC. 

Multi channel Real time  or Memory Profile 570-77A (option)

Options